USB dial (MHz): 0.136, 0.4742, 1.8366, 3.5926, 5.2872, 7.0386, 10.1387, 14.0956, 18.1046, 21.0946, 24.9246, 28.1246, 50.293, 70.091, 144.489, 432.300, 1296.500
There are currently 102 users online.
I started RX on 60m last night and got some signal but calls are suspicious.
I will try to continue 60m for while.
JG1eiQ / Toru
I set-up 2nd RX station(JG1EIQ-2) today.
To investigate SNR for both station, ANT signal is shared by 2 RXs with hybrid.
I will test ANT/ADC/RX in future.
I also would like to monitor 60m/160m.
I started RX only station on Low band.
So far I got signal from US/VK but no EU on 80m.
My friend kindly winded a coil for 600m.
It is working fine with dummy load.
I would get license for 600m in Y2016.
I start WSPR beacon on 2200m today.
So far, myself is only station who get my signal.
I would improve location and ANT.
Pls try to get my signal.
Toru / JG1eiQ
I made 160m LPF for my U3 and tested it with dummy load.
In JA, WSPR freq on 160 nor 80 are off limit.
Pls ignore my post on 160m
I received good report from OC, EU and NA on 30m/40m.
I hope AS activity will be improved soon.
For issues with this site, email the WSPRNET Admin Team or post to the site forum. Downloads and more information about WSPR program and the MEPT_JT mode, as well as other modes by Joe Taylor (K1JT), can be found at the WSJT Home Page.