error string correction?

1 post / 0 new
W2ECK
Offline
Last seen: 1 month 4 weeks ago
Joined: 2010/12/15 - 20:29
error string correction?

I am running WSPR ver 2.11_r2263. It seems to work fine on 20M but no other
bands. I do get the following error string:
_handshake=Hardware T 1
rig_open: error = IO error
Error executing rigctl to set Tx mode: 3 2
rigctl -m 229 -rNone -s 38400 -C data_bits=8 -C stop_bits=2 -C serial
_handshake=Hardware T 1
rig_open: error = IO error
Error executing rigctl to set Tx mode: 4 2
rigctl -m 229 -rNone -s 38400 -C data_bits=8 -C stop_bits=2 -C serial

I say it seems to work fine, I have never been able to change the band from the
software, I just type in a freq to change to a different band.
I am running an Elecraft K3 with Signalink USB interface. Win 7 64 bit PC with
2.2 Ghz processor and 4gb of RAM.

I can run the Faros beacon monitoring program and copy other bands besides 20m
and also other bands using PSK31 (DM780) with same rig set up.

So two questions: do you think this error string has anything do with not copying
other bands?? What changes can I make in the program, to eliminate the errors??

73 Paul kc2nyu