NO TX AUDIO TO MODULATE THE TRANSMITTER

7 posts / 0 new
Last post
W6PJJ
W6PJJ's picture
Offline
Last seen: 1 year 10 months ago
Joined: 2013/02/01 - 17:51
NO TX AUDIO TO MODULATE THE TRANSMITTER

I decided to try one of my SignaLink USB devices for some WSPR Receiving and possibly transmitting but, without success. Its interesting because the SignaLink works with my Mac for all the modes I use with the FLDIGI application. I went through the manual for the SignaLink just in case I missed something but, the fact that the SignaLInk works both in TX and RX for other Digital Modes directs me back to square 1. ( The Application )... I have had a very difficult time with WSPR for MAC Version 2.21. I have been to many sites and forums and find many complaints with this particular version of WSPR for Mac but could not locate a newer version that is recommended. Somehow I believe that this Application is Buggy, I have done all the necessary testing with the Mac and know for certain that all the parameters are correct. I have built several Data interfaces for his Mac Computer and all with good success so, the finger continues to point to WSPR 2.21 Application. Any Mac users out there finding problems with this patched up version of 2.21? I would enjoy corresponding with you in hopes to define the problem and uncover a solution.