WSPR with Kenwood TH-F7E

9 posts / 0 new
Last post
PE0CWK's picture
Last seen: 3 months 4 weeks ago
Joined: 2013/10/20 - 13:42
WSPR with Kenwood TH-F7E

With my Kenwood TH-F7E (it's in the WSPR 2.0 Stations parameters list with Rig number 220) I would operating it in the WSPR mode.
With the Kenwood program MCP-F6/F7 I can manipulate the memorydata and parameter settings from the PC (RS-232 COM1)from/to the TH-F7E.
However the WSPR program has no control over it.
My settings in WSPR Stations parameters are:
PTT Method: RTS
PTT port: COM1 (same as for MCP-F6/F7)
Enable CAT: box unchecked

What are the possible commands WSPR is sending out to the TH-F7E?

If I look to the CAT settings of the WSPR Stations parameters window it looks like if I have to set the TH-F7E in TNC mode and not in PC mode
because a Serialrate, Databits and Stopbits are specified. If that is true I have also to make an other interface cable because the pin functions
of both the 2.5 mm and 3.5 mm plugs into the TH-F7E are different in TNC mode w.r.t. the PC mode.

Does anyone has an idea?