NO XMIT, WSPR with CAT, TT OMNI VI Plus

2 posts / 0 new
Last post
KG2RM
Offline
Last seen: 2 years 5 months ago
Joined: 2015/08/03 - 22:23
NO XMIT, WSPR with CAT, TT OMNI VI Plus

Greetings,

I'm unable to control transmit with 2.11 using my TT Omni VI Plus. I am able to receive beacon transmission nicely (really fascinating!!), but I have no xmit function.

I'm using DELL 830/W7 Laptop, Serial RS-232 9 pin to DB 25 adapter, DB25/DB25 cable to my rig.

Audio OUT from 3.5mm out of Laptop to RCA Audio IN at OMNI.

When i enable PTT Method to CAT control in the 2.11 "STATION PARAMETERS" the PTT PORT selection field is grayed out. I'm not sure where to go from here. (??).

Remaining 2.11 settings are;

CAT Port; i've tried COM1 thru 4
Rig Number; 351/TT/OMNI VI Plus
9600 / 8 / 2 / None

Rig Settings are;

9600 / C-ID 04 / CDE OFF

NOTES;
-Also unable to change bands on the wspr Panel pull down menu. I manually enter freqs, and RX is fine.
-I loaded N1MM Logger(new to me also) and i'm able to perform rig control. freq/band/log qso, etc.

What am I missing?

73 de "Gedi" KG2RM