WSJT-X 1.7 Question

4 posts / 0 new
Last post
WA3DSP
Offline
Last seen: 1 year 8 months ago
Joined: 2015/10/15 - 22:24
WSJT-X 1.7 Question

Will WSJT-X 1.7 do IQ input? I see no reference to it. I am using a Behringer 222 - stereo input USB audio box. The selection says burr Brown stereo codec but the left/right/mono/both option does not include both for the input side only the output side. If this were set to both on input would it do I/Q? I suspect the lack of both is either intentional - no I/Q or an alsa config problem.

If I select the card in ubuntu mate and test the speaker out with headphones on the 222 it works fine, left and right.

**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0

**** List of CAPTURE Hardware Devices ****
card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0

root@doug-Mate:/home/doug/visualwspr# pactl list | grep -A2 'Source #' | grep 'Name: ' | cut -d" " -f2
alsa_output.0.analog-stereo.monitor
alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo.monitor
alsa_input.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00.analog-stereo