VISUAL WSPR SOUND PROBLEM

1 post / 0 new
wp3lr
wp3lr's picture
Offline
Last seen: 2 days 23 hours ago
Joined: 2016/10/19 - 23:55
VISUAL WSPR SOUND PROBLEM

Hi. I'm working in a full time/dedicated wspr beacon using Visual WSPR (on Ubuntu 16.04) for 40/20/15/10m. The radio is a X108G conected via cat cable to the pc and the sound card interface is a Unidigi USB type. Actualy my radio and usb sound card interface work just fine with FLDIGI, MMSTV and WSJT-X (JT65 MODE ONLY). I cant use wsjtx for band hopping because the ptt depends on cat signal but there is no audio present in my cat cable. WSJTX work just fine when no CAT and band hopping is selected.

Visual WSPR is the ideal software for my purpose and solve the no ptt when the band hopping is set because it use Hamlib... but... when I set band hopping with Visual WSPR I can TX (I see my call on the map) but no audio is comming in and no stations are heard. In one or two times the audio is received but it desapear after a few seconds.

I tried on my two ubuntu 16.04 pc with the same results.

The sound card number is 2 and the device number is 0.

I cant find any info on the web. Ihave no clue of what is going on.

Any help will be very apreciated.
Luis

WP4MLX