Error on WSJT-X 2.0 installation

5 posts / 0 new
Last post
g3jkf
g3jkf's picture
Offline
Last seen: 4 hours 45 min ago
Joined: 2009/01/08 - 10:34
Error on WSJT-X 2.0 installation
AttachmentSize
Image icon WSJT-X 2.0 Installation Error.PNG46.76 KB

Installed new WSJT-X version 2.0 which runs on default 40m band.

Installation showed error per png attached.

No selectable frequencies table in Settings - Frequencies.
Manual insertion of bands did not work.

Reinstalled version 1.8 and all runs correctly.
Reinstallation of version 2.0 failed again.

Anyone else had this problem?

Problem solved. Tried moving back to version 1.8, worked OK, then version 1.9 which failed with same problem.
Back to version 1.8 which also now failed. In 1.8 - Settings - Frequencies right clicked and replaced manual entries by Default list. All then OK Then reinstalled version 2.0 again and correct operation ensued. Don't know why the initial version 2.0 installation failed but subsequent problems due to my attempts to manually insert frequencies.